Data insights

Values for power and energy injected to the grid are always indicated as negative values.

1

Instantaneous power drawn from the electricity grid

This value is updated every 10 seconds and displayed in kW.
2

Electricity consumption during the past hour

This value is also updated every ten seconds, with detailed information available for each minute. The measured energy for the past hour is displayed in Wh, the medium power drawn from the grid each minute in W.
3

Daily load profile

The total daily electricity consumption is monitored in kWh. You can read the consumption per hour in kWh by sliding through the diagram. It is also possible to move back in time to look up the energy consumption for previous dates.

Similar to the daily load profile, weekly, monthly and yearly statistics are available and can be compared.
4

Electricity index

The electricity consumption index shows the entirety of the energy consumption measured by your smart meter. This value can be found by selecting a specific dongle under Account > My Smarty+ dongles.

Be aware that you may not be the first owner of your Smarty electricity meter and that this value cannot be reset to 0 when the ownership of the meter changes. However, this value can be used to follow electricity consumption over a longer time interval, by noting the indexes on specific dates and calculating the differences.

Values for power and energy injected to the grid are always indicated as negative values.

1

Instantaneous power generated by your renewable energy production unit

This value is updated every 10 seconds and displayed in kW.
2

Electricity production during the past hour

This value is also updated every ten seconds, with detailed information available for each minute. The measured generated energy for the past hour is displayed in Wh, the average generated power for each minute in W.
3

Load profiles

The daily total electricity production is monitored in kWh. You can consult the production per hour in kWh by sliding through the diagram.. It is possible to move back in time to look up the energy production for previous dates.

Similar to the daily load profile, weekly, monthly and yearly statistics are available and can be compared.
4

Injected energy index

The injected energy index shows the entirety of the energy production measured by your smart meter. This value can be found by selecting a specific dongle under Account > My Smarty+ dongles.

Be aware that you may not be the first owner of your Smarty electricity meter and that this value cannot be reset to 0 when the ownership of the meter changes. However, this value can be used to follow electricity production over a longer time interval, by noting the indexes on specific dates and calculating the differences.

Please consider that you will need two dongles to take advantage of this feature, as the consumption and the production smart meter need to be monitored separately. The combined screen can be accessed through the COMBINE CONSUMPTION & PRODUCTION-button in the app, which is only available for electrical meters.

On this screen, the indicated values can be positive or negative, depending on your absolute energy needs during a given time. If your personal electricity production installation covers the energy needs of your consumers and excess energy is injected into the grid, the displayed values for the considered time interval are negative. Vice versa, during times of high consumption and low production, you will need to draw additional energy from the grid and the values will be positive.

The displayed values are calculated by deducting the measurement of your production smart meter from the values registered by your consumption smart meter. Be therefore aware that the results can only be correct if both meters are mounted in a parallel constellation (not serial).

1

Combined instantaneous power drawn or injected from/to the electricity grid

This value is updated every 10 seconds and displayed in kW.
2

Combined electricity consumption and production during the past hour

This value is also updated every ten seconds, with detailed information available for each minute. The measured energy for the past hour is displayed in Wh and calculated by subtracting the produced energy from the consumed energy. By sliding over the graph, the avarage power needs for each minute are indicated in W. Excess production power that is injected back into the grid is indicated in dark blue, while the part of the consumption covered by your generation unit is displayed in green. If your generation unit does not cover your entire energy needs, additional power drawn from the grid will show up in light blue.
3

Combined load profiles

The daily total electricity consumption can be consulted in kWh in the blue tap. It is the sum of the energy supplied by the grid (light blue) and supplied by your generation unit (green). Similarly, the green tab shows the daily total electricity production as a sum of the auto-consumed energy (green) and the excess energy injected into the grid (dark blue). By sliding through the graphs, detailed information per hour will be shown.

Similar to the daily combined load profile, weekly, monthly and yearly statistics are available and can be compared.

Some municipalities have opted to install smart water meters that transfer their measurements via the Smarty electricity meter to a common platform. Check with the technical department of your municipality to see if those smart water meters are available where you live! If a smart water meter is installed and connected at your home, you do not need an additional dongle to access those data. Simply check out this link to learn how to activate data transfer via the P1 port.

1

Consumption profiles

To monitor your water consumption, a daily profile with details per hour is available. As the smart water meter transmits data only every 15 minutes, instantaneous consumption and details per minute will not be displayed.

Water consumption is measured in m³.

1 m³ = 1.000 l

Similar to the daily consumption profile, weekly, monthly and yearly statistics are available and can be compared.
2

Water index

The water index shows the total water consumption measured by your smart water meter. This value can be found by selecting the Smarty+ dongle connected to the same Smarty electricity meter to which your water meter is connected to (under Account > My Smarty+ dongles).

Be aware that you may not be the first owner of your smart water meter and that this value cannot be reset to 0 when the ownership of the meter changes. However, this value can be used to follow water consumption over a longer time interval, by noting the indexes on specific dates and calculating the differences.

If you are a gas client, there is a high probability, that your gas meter is intelligent and connected to your Smarty electricity meter. Check with your gas grid operator to see if this is the case for your home. Without installing an additional dongle, you can monitor your gas consumption in the Smarty+ app. Simply check out this link to learn how to activate data transfer via the P1 port.

1

Consumption profiles

To monitor your gas consumption, a daily profile with details per hour is available. As the smart gas meter transmits data only every 15 minutes, instantaneous consumption and details per minute will not be displayed.

Gas consumption is measured in m³.

1 m³ = 1.000 l

Similar to the daily consumption profiles, weekly, monthly and yearly statistics are available and can be compared.
2

Gas index

The gas index shows the total gas consumption measured by your smart gas meter. This value can be found by selecting the Smarty+ dongle connected to the same Smarty electricity meter to which your gas meter is connected (under Account > My Smarty+ dongles).

Be aware that you may not be the first owner of your smart gas meter and that this value cannot be reset to 0 when the ownership of the meter changes. However, this value can be used to follow gas consumption over a longer time interval, by noting the indexes on specific dates and calculating the differences.